Screw rust removal is a common job, but there may be some dangers in practice. Therefore, it is very important to understand the rust removal condition and master the correct operation steps. This article will introduce in detail the working condition of screw rust removal and how to safely screw rust removal. Recommend a new technology product ENIENTEC0132 neutral rust removal agent.

1. Screw rust removal working condition

 Rust removal is usually for the rust of the screw surface. Over time, the screw surface will rust due to the mixing of oxygen, moisture, corrosive and other substances, causing the screw to work properly or cause damage in the future. Therefore, the following factors should be noted when conducting screw rust removal:

1. Temperature: the working temperature of rust removal is generally between 5 degrees and 35 degrees, because too high or too low temperature will affect the effect of rust removal.

2. Humidity: During rust removal, the workplace should be kept dry to avoid moisture interference.

3. Environment: rust removal should not be conducted in an environment containing preservatives or organic solvents, otherwise the surface quality of the screw parts will be affected.

2. Operation steps of screw rust removal

1. Preparation: First of all, confirm whether the required materials and tools are complete. All necessary tools and supplies such as safety protection equipment, rust remover, brush, oil, cloth, waste newspaper, rust removal agent should be ready.

2. Remove debris: put the screws that need rust removal on the old newspaper, and use a small wire to pick out the debris inside the screws to ensure smooth rust removal.

3. Brush the rust removal agent: smear the ENIENTEC0132 neutral rust remover on the rust removal screw with a brush, and try to ensure that the surface of each screw is applied to it.

4. Waiting time: According to the requirements of the rust removal agent, wait for a few minutes, so that the rust removal agent can give full play, and break up or dissolve the rust on the screws.

5. rust removal layer: use a rust removal knife or screwdriver to scrape the rust layer, not too hard, otherwise it is easy to damage the surface of the screw.

6. Irrigation and cleaning: thoroughly rinse the screws with clean water to remove the residual rust remover and dust on the surface.

7. Wipe and maintenance: dry the surface of the screw with a clean tarpaulin, and pay attention not to have rust residue. Finally, apply a layer of anti-rust grease to maintain the screws.

3. Safety precautions

1. Before rust removal, you must wear protective clothing and gloves to avoid chemical splashes on the skin or eyes;

2. In the operation, the instructions for the use of the rust removal agent should be strictly followed, and do not exceed the service life or the solution concentration;

Rust remover is flammable material, away from open fire and high temperature environment

ENIENT ® products are the key to a clean and safe working environment across a wide range of industries. Our innovative and reliable super-safe rust remover delivers uncompromising performance, making rust removal a very simple job. Our rust remover can be easily applied to scenes that need rust removal. It can replace refrigerant and rust removal oil, making rust removal easier and eliminating additional rust removal processes. 

We ensure that you have easy access to technical information and resources to identify the right product for your specific application, sector and industry. We offer comprehensive support to let you know more about our innovative rust removal solutions and how they can help you. 

For more information about the product, CONTACT ENIENT CHEM and consult to one of our technical advisors. Browse our product range and download technical datasheets to learn more about the specific performance, compatibility, and application of each descaling scenario.